Round Bar Grade En 19
The En 19 is a high tensile, low alloy steel that is mostly used to manufacture typical industrial engineering equipments such as shafts, nuts, bolts etc. It is also the preferred metal to manufacture engine parts such as shafts, pinions, spindles and gears. This steel is normally tempered and hardened to improve its tensile strength to the range of 700- 1000 N/mm.
| Grades | EN19/AISI 4140/DIN 1.7225/JIS SCM440 alloy steel, chrome molybdenum steel |
| Thickness | 10 mm to 600 mm |
| Finish | Mill Finish |
| Size | Available |
| 10 mm | |
| 12 mm | |
| 14 mm | |
| 16 mm | |
| 18 mm | |
| 20 mm | |
| 22 mm | |
| 25 mm | |
| 28 mm | |
| 30 mm | |
| 32 mm | |
| 35 mm | |
| 38 mm | |
| 40 mm | |
| 42 mm | |
| 45 mm | |
| 50 mm | |
| 55 mm | |
| 60 mm | |
| 65 mm | |
| 70 mm | |
| 75 mm | |
| 80 mm | |
| 85 mm | |
| 90 mm | |
| 95 mm | |
| 100 mm | |
| 110 mm | |
| 120 mm | |
| 130 mm | |
| 140 mm | |
| 150 mm | |
| 160 mm | |
| 170 mm | |
| 180 mm | |
| 190 mm | |
| 200 mm | |
| 210 mm | |
| 220 mm | |
| 230 mm | |
| 240 mm | |
| 250 mm | |
| 260 mm | |
| 270 mm | |
| 280 mm | |
| 290 mm | |
| 300 mm | |
| 320 mm | |
| 350 mm | |
| 400 mm | |
| 450 mm | |
| 500 mm | |
| 550 mm | |
| 600 mm |
Other Grades and sizes available as per request
